A successful project for Vattenfall

SubC Partner was hired to design, produce and install a Push-On Unit for Ampelmann Landing on Horns Rev 3 OSS.

(JibFlex is developed and patented by SubC)

The Push-On unit has a weight of 150 kg and had to be lifted in place in an area without any low-cost possibilities for use of a conventional crane.

As a solution, SubC decided to use JibFlex with a special connection to the platform, for moving and lifting the Push-On unit in place – safe and easy. After the project, our JibFlex was easily dismounted and prepared for a new job.

Jibflex is an innovative solution with many possibilities made in flexible lightweight aluminium modules – produced in our aluminium department in Esbjerg.

LinkedIn

Group 6
Why JibFlex?

The JibFlex is ideal for complicated lifting operations.
It moves around corners and obstacles, where no ordinary jib arm can work, thus reducing the need for manual handling.

Here is why we call it JibFlex:

  • It moves loads around corners
  • It operates freely in any direction
  • It can be wrapped around itself when not in use